Service's PMT was not found
Posted: Thu Feb 14, 2019 8:47 pm
Hi,
Hopefully, someone might be able to offer some advice on an issue I'm having.
I have Argus TV set up on a Windows 10 box, running the latest version of Argus TV. A radio channel I use (UK Freeview, DVB-T) has moved multiplexes, so I re-scanned the correct frequency and Argus TV found the channel perfectly. The problem is that I now get the "Service's PMT was not found" error when I try to record that service manually. I've scoured the forums for similar problems and the only effective advice I found seemed to be for cable channels...
The recorder log looks like this:
2019-02-14 18:40:48.8145 [Info ][Graph]: Tuning to LBC
2019-02-14 18:40:48.8145 [Info ][Graph]: Tuning to 666000 8MHz Rate3_4 Mod64Qam
2019-02-14 18:40:48.8145 [Debug][Graph]: Starting graph
2019-02-14 18:40:50.4022 [Info ][Graph]: Signal locked, quality: 65%, strength: 67
2019-02-14 18:40:50.4022 [Debug][Graph]: Looking for service 0x5960 for LBC...
2019-02-14 18:40:50.6438 [Debug][Graph]: Starting stream for service 0x5960
2019-02-14 18:41:00.6453 [Error][Graph]: Stream didn't start
2019-02-14 18:41:00.6453 [Debug][Graph]: Stopping graph
All other channels on the same frequency are fine, and I've never had this problem before. I just want to know if it's something that is a problem at my end or an issue with the channel itself.
Hopefully, someone might be able to offer some advice on an issue I'm having.
I have Argus TV set up on a Windows 10 box, running the latest version of Argus TV. A radio channel I use (UK Freeview, DVB-T) has moved multiplexes, so I re-scanned the correct frequency and Argus TV found the channel perfectly. The problem is that I now get the "Service's PMT was not found" error when I try to record that service manually. I've scoured the forums for similar problems and the only effective advice I found seemed to be for cable channels...
The recorder log looks like this:
2019-02-14 18:40:48.8145 [Info ][Graph]: Tuning to LBC
2019-02-14 18:40:48.8145 [Info ][Graph]: Tuning to 666000 8MHz Rate3_4 Mod64Qam
2019-02-14 18:40:48.8145 [Debug][Graph]: Starting graph
2019-02-14 18:40:50.4022 [Info ][Graph]: Signal locked, quality: 65%, strength: 67
2019-02-14 18:40:50.4022 [Debug][Graph]: Looking for service 0x5960 for LBC...
2019-02-14 18:40:50.6438 [Debug][Graph]: Starting stream for service 0x5960
2019-02-14 18:41:00.6453 [Error][Graph]: Stream didn't start
2019-02-14 18:41:00.6453 [Debug][Graph]: Stopping graph
All other channels on the same frequency are fine, and I've never had this problem before. I just want to know if it's something that is a problem at my end or an issue with the channel itself.