I see it is scanning but does not find any dvb-c channels
after investigation I found following.
my provider onsbrabantnet.nl in the netherlands has following information.
frequency 304 Mhz
symbols 6875
Modulation: 64 Qam
however non of the frequency tables has the 304 Mhz so most probally this is the problem it does not find the channels.
is it possible to make your own frequency table with desired symbols and modulation ?
i could not find this in the database but maybe overlooked it.
scanning failed due to frequency is not there to select
-
- Posts: 2
- Joined: Mon Jan 05, 2015 8:28 pm
Re: scanning failed due to frequency is not there to select
The tuning XMLs are under C:\ProgramData\ARGUS TV\Tuning - just create a copy of cable, edit it to the frequencies you want & then rename the existing one & replace it with yours.
-
- Posts: 2
- Joined: Mon Jan 05, 2015 8:28 pm
Re: scanning failed due to frequency is not there to select
tanks i found the file and added the frequency.
Then did a scan and it works for 4 channels at least.
i have to check which frequencys are more used and will add it later.
Then did a scan and it works for 4 channels at least.
i have to check which frequencys are more used and will add it later.
-
- Posts: 1070
- Joined: Wed Oct 19, 2011 9:39 am
- Location: Berne / Switzerland
Re: scanning failed due to frequency is not there to select
Dear jmg
I only saw now, that you have problems with scanning.
I´m glad you solved it - for the first step.
I recommend the following thread: viewtopic.php?f=63&t=3924
Could you add your changes in a post there, too? Then your freqs will be incorporated in the new Tuning XMLs for other users, too.
You will find also the link to the Wiki guide ob how to create your entries there.
And if you need further help, pls drop a message.
Kind greetz from Switzerland - Chris
I only saw now, that you have problems with scanning.
I´m glad you solved it - for the first step.
I recommend the following thread: viewtopic.php?f=63&t=3924
Could you add your changes in a post there, too? Then your freqs will be incorporated in the new Tuning XMLs for other users, too.
You will find also the link to the Wiki guide ob how to create your entries there.
And if you need further help, pls drop a message.
Kind greetz from Switzerland - Chris
"One must still have chaos within oneself, to give birth to a dancing star." (F. Nietzsche)
Who is online
Users browsing this forum: No registered users and 6 guests