Fewer glitches when using MP as backend
- fishsticks
- Posts: 79
- Joined: Mon Dec 23, 2013 1:08 am
- Location: UK
Fewer glitches when using MP as backend
I notice using MP's (1.15) backend results in significantly fewer glitches compated to Argus. Years ago when I had tried MP's backend it was totaly unreliable, they seem to have made good progress. When scanning with MP, the options are very specific, down to selecting the specific transmitter (Crystal Palace which is the big one for London). Argus's options are rather generic "DVB-T in Europe". Does the MP's specificity make a difference to quality/accuracy? With Argus, should I change the offset and NIT selections? My aerial isn't great, it's good most of the time unless heavy weather and some lesser channels are often unwatchable even when clear.
Re: Fewer glitches when using MP as backend
Thanks for mentioning your results with MP 1.15.
I have no experience with DVB-T tuners, but I run MP as my 'tuner backend' for HDPVR2 'tuners'. I have a total of 24 of these assigned in pairs to 12 MP servers (I use it to record classroom lectures). The MP portion is 100 solid, however occasionally an HDPVR 2 device will become non-responsive until I power-cycle it. I'm certain it's a hardware/USB issue because the other device on the same server continues working without a hitch.
I sure do wish we could get ArgusTV development restarted.
I have no experience with DVB-T tuners, but I run MP as my 'tuner backend' for HDPVR2 'tuners'. I have a total of 24 of these assigned in pairs to 12 MP servers (I use it to record classroom lectures). The MP portion is 100 solid, however occasionally an HDPVR 2 device will become non-responsive until I power-cycle it. I'm certain it's a hardware/USB issue because the other device on the same server continues working without a hitch.
I sure do wish we could get ArgusTV development restarted.
Re: Fewer glitches when using MP as backend
You can create your own XML file with the frequencies you want to include in the scans. It's dead simple, as long as you can find a list somewhere.When scanning with MP, the options are very specific, down to selecting the specific transmitter (Crystal Palace which is the big one for London).
I do this to similarly ensure that I'm only tuning into the local DVB-T transmitter, and don't accidentally pick up (or waste time scanning) frequencies from adjacent transmitters.
Who is online
Users browsing this forum: No registered users and 35 guests