live tv only after scanning frequencies
Posted: Sat Jul 21, 2018 11:52 pm
Hi
the past few days, max be a week, I cannot record or view live tv (kodi) because I have "no signal".
But when I start the recorder console and start scanning services, the signal comes back and the tuner fires the recording and even live tv works again.
my first idea was the tuner card, but the TV software from the manufacturer works like a charm while argus tv blocks...
is this an already known issue (may be as a result from some windows updates)?
the setup:
windows 10 with argus tv 2.3 running on a core i7 32 GB RAM 500GB SSD 2x Cine S2 Cards (4 tuners) via splitter on a single cable LNB
Addition 1:
If I run the "DD TV" application, which is a stand alone TV app, argus tv seems to work. So I think it has to do with initializing the tuners or something like that. But I', only guessing. A real PRO could help out here and clarify, I hope...
the past few days, max be a week, I cannot record or view live tv (kodi) because I have "no signal".
But when I start the recorder console and start scanning services, the signal comes back and the tuner fires the recording and even live tv works again.
my first idea was the tuner card, but the TV software from the manufacturer works like a charm while argus tv blocks...
is this an already known issue (may be as a result from some windows updates)?
the setup:
windows 10 with argus tv 2.3 running on a core i7 32 GB RAM 500GB SSD 2x Cine S2 Cards (4 tuners) via splitter on a single cable LNB
Addition 1:
If I run the "DD TV" application, which is a stand alone TV app, argus tv seems to work. So I think it has to do with initializing the tuners or something like that. But I', only guessing. A real PRO could help out here and clarify, I hope...