SchedulesDirect JSON client

Other clients written by the community
Post Reply
geoffstewart
Posts: 152
Joined: Sat Sep 18, 2010 1:29 am
Location: Ottawa, ON, Canada

Re: SchedulesDirect JSON client

Post by geoffstewart » Thu Mar 26, 2015 7:46 pm

Glad to hear. Thanks for the update.

et23kochie
Posts: 23
Joined: Mon Jan 26, 2015 2:18 am

Re: SchedulesDirect JSON client

Post by et23kochie » Sun Apr 05, 2015 12:09 am

Finally got a change to test this version and it worked great. Here is what I did (for the next person):

Unzipped by opening 7zip as administrator.
Opened application from folder and ran config for JSON.
Entered info and saved settings. Imported lineups and saved.
Refreshed channels (the selections were the same from the normal plugin).
Imported, it worked perfect. Checked EPG and everything was correct.
Updated scheduled task to use test folder and correct plugin.

Thanks for your work on this!

geoffstewart
Posts: 152
Joined: Sat Sep 18, 2010 1:29 am
Location: Ottawa, ON, Canada

Re: SchedulesDirect JSON client

Post by geoffstewart » Mon Apr 06, 2015 4:08 pm

I'm glad it's working for you... Really, it should behave the same as the other plugin but with the added bonus of the SxxExx naming built in.

The other features built into the JSON interface are not really usable in the way that the ARGUS Guide Importer is designed... partial updates, etc.

et23kochie
Posts: 23
Joined: Mon Jan 26, 2015 2:18 am

Re: SchedulesDirect JSON client

Post by et23kochie » Wed Apr 08, 2015 5:57 am

I had to switch back. The JSON is not including about 90% of the first run/premier data.

geoffstewart
Posts: 152
Joined: Sat Sep 18, 2010 1:29 am
Location: Ottawa, ON, Canada

Re: SchedulesDirect JSON client

Post by geoffstewart » Wed Apr 08, 2015 4:51 pm

Drag.

Can you post some schedules you were using that were not working properly? I'll get your data and see what gets downloaded... perhaps I'm translating the info improperly...

g

et23kochie
Posts: 23
Joined: Mon Jan 26, 2015 2:18 am

Re: SchedulesDirect JSON client

Post by et23kochie » Wed Apr 08, 2015 8:02 pm

Zip code 55014
Antenna lineup

geoffstewart
Posts: 152
Joined: Sat Sep 18, 2010 1:29 am
Location: Ottawa, ON, Canada

Re: SchedulesDirect JSON client

Post by geoffstewart » Wed Apr 08, 2015 9:11 pm

et23kochie wrote:Zip code 55014
Antenna lineup
Sorry, I meant a particular show that you're recording but get the wrong episodes... Describe what your filter is and what shows are being skipped or recorded incorrectly



Sent from my Nexus 5 using Tapatalk

ams123
Posts: 24
Joined: Sat Dec 27, 2014 4:08 pm

Re: SchedulesDirect JSON client

Post by ams123 » Mon Apr 13, 2015 1:12 pm

I have the same issue, schedules set for first run only are recording reruns.

Antenna, 48070
Show The Blacklist Ch 4.1 April 23rd is recording S02E01 (a rerun) and S02E19

geoffstewart
Posts: 152
Joined: Sat Sep 18, 2010 1:29 am
Location: Ottawa, ON, Canada

Re: SchedulesDirect JSON client

Post by geoffstewart » Thu Apr 16, 2015 5:31 am

Hi again,

I managed to find some time to figure out what was going on... I recreated the bug with setting the "IsRepeat" value and have a fix....

Have a go, if you like.

Cheers.

Geoff
Attachments
GuideImporter-TESTv1.3.zip
Fix for showing new episodes vs repeats
(1.29 MiB) Downloaded 220 times

ams123
Posts: 24
Joined: Sat Dec 27, 2014 4:08 pm

Re: SchedulesDirect JSON client

Post by ams123 » Thu Apr 16, 2015 12:59 pm

Hi Geoff,

Well I configured it but did not import and see if the first run issue was fix because the channel numbers appear to have reverted to the RF from the logical or guide channel.

ZIP 48070

Fox 2.1 WJBK showed up as 2.1 WJBKDT in v1.2 and is now 7 WJBKDT in v1.3 for Logical Channel Number / Callsign.

Thanks
Aaron

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest