SchedulesDirect JSON client
-
- Posts: 152
- Joined: Sat Sep 18, 2010 1:29 am
- Location: Ottawa, ON, Canada
Re: SchedulesDirect JSON client
Glad to hear. Thanks for the update.
-
- Posts: 23
- Joined: Mon Jan 26, 2015 2:18 am
Re: SchedulesDirect JSON client
Finally got a change to test this version and it worked great. Here is what I did (for the next person):
Unzipped by opening 7zip as administrator.
Opened application from folder and ran config for JSON.
Entered info and saved settings. Imported lineups and saved.
Refreshed channels (the selections were the same from the normal plugin).
Imported, it worked perfect. Checked EPG and everything was correct.
Updated scheduled task to use test folder and correct plugin.
Thanks for your work on this!
Unzipped by opening 7zip as administrator.
Opened application from folder and ran config for JSON.
Entered info and saved settings. Imported lineups and saved.
Refreshed channels (the selections were the same from the normal plugin).
Imported, it worked perfect. Checked EPG and everything was correct.
Updated scheduled task to use test folder and correct plugin.
Thanks for your work on this!
-
- Posts: 152
- Joined: Sat Sep 18, 2010 1:29 am
- Location: Ottawa, ON, Canada
Re: SchedulesDirect JSON client
I'm glad it's working for you... Really, it should behave the same as the other plugin but with the added bonus of the SxxExx naming built in.
The other features built into the JSON interface are not really usable in the way that the ARGUS Guide Importer is designed... partial updates, etc.
The other features built into the JSON interface are not really usable in the way that the ARGUS Guide Importer is designed... partial updates, etc.
-
- Posts: 23
- Joined: Mon Jan 26, 2015 2:18 am
Re: SchedulesDirect JSON client
I had to switch back. The JSON is not including about 90% of the first run/premier data.
-
- Posts: 152
- Joined: Sat Sep 18, 2010 1:29 am
- Location: Ottawa, ON, Canada
Re: SchedulesDirect JSON client
Drag.
Can you post some schedules you were using that were not working properly? I'll get your data and see what gets downloaded... perhaps I'm translating the info improperly...
g
Can you post some schedules you were using that were not working properly? I'll get your data and see what gets downloaded... perhaps I'm translating the info improperly...
g
-
- Posts: 23
- Joined: Mon Jan 26, 2015 2:18 am
Re: SchedulesDirect JSON client
Zip code 55014
Antenna lineup
Antenna lineup
-
- Posts: 152
- Joined: Sat Sep 18, 2010 1:29 am
- Location: Ottawa, ON, Canada
Re: SchedulesDirect JSON client
Sorry, I meant a particular show that you're recording but get the wrong episodes... Describe what your filter is and what shows are being skipped or recorded incorrectlyet23kochie wrote:Zip code 55014
Antenna lineup
Sent from my Nexus 5 using Tapatalk
Re: SchedulesDirect JSON client
I have the same issue, schedules set for first run only are recording reruns.
Antenna, 48070
Show The Blacklist Ch 4.1 April 23rd is recording S02E01 (a rerun) and S02E19
Antenna, 48070
Show The Blacklist Ch 4.1 April 23rd is recording S02E01 (a rerun) and S02E19
-
- Posts: 152
- Joined: Sat Sep 18, 2010 1:29 am
- Location: Ottawa, ON, Canada
Re: SchedulesDirect JSON client
Hi again,
I managed to find some time to figure out what was going on... I recreated the bug with setting the "IsRepeat" value and have a fix....
Have a go, if you like.
Cheers.
Geoff
I managed to find some time to figure out what was going on... I recreated the bug with setting the "IsRepeat" value and have a fix....
Have a go, if you like.
Cheers.
Geoff
- Attachments
-
- GuideImporter-TESTv1.3.zip
- Fix for showing new episodes vs repeats
- (1.29 MiB) Downloaded 1037 times
Re: SchedulesDirect JSON client
Hi Geoff,
Well I configured it but did not import and see if the first run issue was fix because the channel numbers appear to have reverted to the RF from the logical or guide channel.
ZIP 48070
Fox 2.1 WJBK showed up as 2.1 WJBKDT in v1.2 and is now 7 WJBKDT in v1.3 for Logical Channel Number / Callsign.
Thanks
Aaron
Well I configured it but did not import and see if the first run issue was fix because the channel numbers appear to have reverted to the RF from the logical or guide channel.
ZIP 48070
Fox 2.1 WJBK showed up as 2.1 WJBKDT in v1.2 and is now 7 WJBKDT in v1.3 for Logical Channel Number / Callsign.
Thanks
Aaron
Who is online
Users browsing this forum: No registered users and 16 guests